|
|
|
| Optional: |
|
- Storage silo with loadout belt conveyor
- Cement stabilization system (C.T. A.B.) system
- Single deck over size vibrating screen
- Water tank
- Printout system
|
|
|
|
|
|
|
|
|
|
| Salient Technical Features of Maxmech -WMM Plant |
|
- "MAXMECH" WMM Plant has several outstanding technical features which make them the right choice for construction work.
- "MAXMECH" pugmill unit is lined on the inside with 12 mm Ni-hard (Nickle Hard) replaceable tiles as against normal M.S. liner plate of 5 mm. thickness used by other manufacturers. These liners are for inner shell & side plate, Asa result of this minimum wearing occurs resulting in longer life of the pugmill as compared to other manufacturers.
- "MAXMECH" pugmill arm & tips are of heavy duty design (inspired by German design) to achieve homogeneous mix especially the Ni-hard tips of size 264 mm x 134 mm x 32 mm thick as against small size of other manufacturers. As a result of this minimal wear & tear occurs, which in turn leads to Economical Operational Cost of the plant.
- "MAXMECH" pugmill is designed to take overload of 20% in continuous operation without affecting the quality of mix.
- Due to low power requirement in 'MAXMECH" plant against higher power consumption of other manufacturers there will be substantial saving in consumption of diesel in D.G Set; reflecting power efficient design.
- All conveyor structures of "MAXMECH" plant are fabricated from heavy duty structure with adequate cross strengthening as against single channel provided by other manufacturers.
- The volume of "MAXMECH" pugmill is comparatively higher than other manufacturers resulting in better mix and fluent discharge of mix material.
- "MAXMECH" provides all important inputs like; Electric Motor, Gear Box, Bearing etc. of standard and approved make, as against local make inputs provided by other manufacturers.
|
|
| Intoduction and Application |
|
"MAXMECH" Wet Mix Macadam Plant, an application designed product built as per M.O.S.T. specifications for achieving homogeneous mix material of WMM / C.T.A.B. / G.S.B. layer to prepare sub-base/base in road projects.
"MAXMECH" has rich experience in the field of civil construction machineries especially in road construction coupled with the world best technology, guarantee, reliability and productivity In addition, our stringent quality control checks and wear tests ensures higher quality for all "MAXMECH" machineries.
- Electronic Weighment System with Load Cell having weighing accuracy ± 0.5% for aggregate
- An Electronic Water Flow Meter with Sensor unit having accuracy of ± 2 litre
- A Monoblock Water Pump
|
|
|
|
|
| Pugmill Unit |
|
- A heavy duty low speed Pugmill type Mixer with steel casting paddles, replaceable and adjustable Ni-HardTips and replaceable Ni-Hard Liner Plates
|
|
 |
|
|
| Storage Silo & Load out Belt Conveyor |
|
- Load out Belt Conveyor to feed the material from Pugmill to top of the Storage Silo. Storage Silo of 25 Ton capacity with hydraulic discharge gate, power pack unit
|
|
 |
|
|
| Operator's Cabin |
|
- Operator's Cabin with necessary all round glazing. A control panel with necessary controls, push buttons, meters & electronic display of aggregate in Tons/hr and water in LPM.
- MAXMECH is endorsed as the country's most power efficient construction equipment manufacturer.
|
|
 |
|
|
| Technical Specification |
| MODEL |
Unit |
MWMP 120 |
MWMP 160 |
MWMP 200 |
MWMP 250 |
OUTPUT CAPACITY FOUR
BIN FEEDER |
TPH |
120 |
160 |
200 |
250 |
| Capacity |
m3 |
30 |
36 |
36 |
48 |
| Loading width |
mm |
2500 |
2500 |
3200 |
3200 |
| Auxiliary conveyor |
mm/h.p. |
500/2 |
500/2 |
500/2 |
500/3 |
| Collecting conveyor |
mm / h.p. |
600/5 |
600/7.5 |
750/7.5 |
750/10 |
| Vibrator for fine agg. Bin |
h.p. |
1.5 |
1.5 |
1.5 |
1.5 |
| SLINGER CONVEYOR PUGMILL (MIXER) |
h.p. |
5 |
7.5 |
10 |
10 |
| Capacity |
m3 |
1.6 |
2 |
2 |
2.75 |
| No. of paddle arm pairs |
Pair |
9 |
11 |
13 |
15 |
| Connected Load |
h.p. |
20 |
30 |
40 |
50 |
| WATER PUMP |
h.p. |
2 |
3 |
3 |
3 |
| HYD. POWER PACK |
h.p, |
3 |
3 |
3 |
3 |
| GOB HOPPER |
Kgs. |
2000 |
2000 |
2000 |
2000 |
| OPTIONAL ACCESSORIES |
| STORAGE SILO |
|
|
|
|
|
| Capacity |
Ton |
25 |
25 |
25 |
25 |
| Load out conveyor |
mm |
600 |
600 |
750 |
750 |
| Connected Load |
h.p |
5 |
7.5 |
10 |
10 |
| FILLER HOPPER |
| Capacity |
Ton |
6 |
6 |
6 |
6 |
| Conn. Load (Screw conveyor) |
h.p. |
7.5 |
7.5 |
7.5 |
7.5 |
VIBRATING SCREEN
DISCHARGE HEIGHT |
h.p. |
2 |
3 |
3 |
3 |
| Direct Discharge |
mt. |
2.6 |
2.6 |
2.6 |
2.6 |
| With Storage Silo |
mt. |
4 |
4 |
4 |
4 |
| TOTAL CONNECTED LOAD |
| Direct Discharge (Std. Scope) |
h.p. |
44.5 |
60.5 |
73 |
89.5 |
| With Storage Silo (Std. Scope) |
h.p. |
44.5 |
60.5 |
73 |
89.5 |
|
|
 |