Salient
Technical Features of Maxmech Equipment
-WMM Plant
"MAXMECH"
WMM Plant has several outstanding
technical features which make them the
right choice for construction work.
"MAXMECH" pugmill unit
is lined on the inside with 1 0 mm Ni-hard
(Nickle Hard) replaceable tiles as against
normal M.S. liner plate of 5 mm. thickness
used by other manufacturers. These liners
are for inner shell & side plate,
Asa result of this minimum wearing occurs
resulting in longer life of the pugmill
as compared to other manufacturers.
"MAXMECH" pugmill arm
& tips are of heavy duty design
(inspired by German design) to achieve
homogeneous mix especially the Ni-hard
tips of size 264 mm x 134 mm x 32 mm
thick as against small size of other
manufacturers. As a result of this minimal
wear & tear occurs, which in turn
leads to Economical Operational Cost
of the plant.
"MAXMECH"
pugmill is designed to take overload
of 20°o in continuous operation
without affecting the quality of mix.
Due to low power requirement in 'MAXMECH"
plant against higher power consumption
of other manufacturers there will be
substantial saving in consumption of
diesel in D.G Set; reflecting power
efficient design.
All conveyor structures of "MAXMECH"
plant are fabricated from heavy duty
structure with adequate cross strengthening
as against single channel provided by
other manufacturers.
The volume of "MAXMECH" pugmill
is comparatively higher than other manufacturers
resulting in better mix and fluent discharge
of mix material.
"MAXMECH"
provides all important inputs like;
Electric Motor, Gear Box, Bearing etc.
of standard and approved make, as against
local make inputs provided by other
manufacturers.
Intoduction and
Application
"MAXMECH"
Wet Mix Macadam Plant, an application
designed product built as per M.O.S.T.
specifications for achieving homogeneous
mix material of WMM / C.T.A.B. / G.S.B.
layer to prepare sub-base/base in road
projects. "MAXMECH" has
rich experience in the field of civil
construction machineries especially
in road construction coupled with the
world best technology, guarantee, reliability
and productivity In addition, our stringent
quality control checks and wear tests
ensures higher quality for all "MAXMECH"
machineries.
Electronic Weighment
System with Load Cell having weighing
accuracy ± 0.5% for aggregate
An Electronic Water
Flow Meter with Sensor unit having accuracy
of ± 2 litre
A Monoblock Water
Pump
Pugmill
Unit
A heavy duty
low speed Pugmill type Mixer with
steel casting paddles, replaceable
and adjustable Ni-HardTips and
replaceable Ni-Hard Liner Plates
Storage Silo
& Load out Belt Conveyor
Load out Belt
Conveyor to feed the material
from Pugmill to top of the Storage
Silo.
Storage Silo of 25 Ton capacity
with hydraulic discharge gate,
power pack unit
Operator's
Cabin
Operator's
Cabin with necessary all round
glazing. A control panel with
necessary controls, push buttons,
meters & electronic display
of aggregate in Tons/hr and water
in LPM.
MAXMECH is endorsed as the country's
most power efficient construction
equipment manufacturer.
